Engineered for streamlined access—key switch, timer, and e-stop right where you need them, this Commercial Electric Control In-Ground Post Tower centralizes controls for hotels, resorts, apartments, and shared amenity decks. The 304 stainless steel post is sized for real-world use at 5½" W x 42¾" H x 5½" D, and it’s purpose-built to set in concrete for a clean, permanent look that won’t clutter the deck or walkway. It accepts up to three standard single-gang boxes, so you can build the mix you need without custom metalwork.
For safety and code compliance, installation must be performed by a licensed electrician. The tower is designed for direct hard-wiring and must be powered by a dedicated GFCI circuit breaker properly sized for the load (when using RHP/Fire Magic controls, 110–120VAC, max 20A). Follow all local codes and the latest NEC/CEC requirements.
Site-friendly by design, the in-ground model sets into a hole approximately 18" deep and 10–12" in diameter, with the assembly positioned just above grade so the rear access plate stays reachable after the pour. It pairs seamlessly with Fire Magic/R.H. Peterson commercial modules—5531-10K (Master Key Switch), 5531-11T (1-Hour Timer with indicator), and 5550-110S (Emergency Stop)—and remains compatible with most single-gang boxes for easy service down the road.
Compatible with: 5531-10K, 5531-11T, 5550-110S, and most single-gang bo
